Patio Covers in New Braunfels

Per-square-foot ranges reflect the current New Braunfels market. Attachment method, roof tie-in, electrical runs, and footing conditions all move the number; the builder prices from an on-site measure and itemizes everything in writing.

Whole-project math: most projects land between $4,000 and $19,000 installed. A modest single-skin aluminum roof over a 12×12 slab sits near the bottom; a deep insulated cover with electrical, or a large stained-timber build, reaches the top. Torn between the first two rows? See alumawood vs insulated panels.

• Real attachment, not lag-and-hope. Ledgers hit structure, flashing goes under the drip edge, and the connection is detailed for the permit drawing — because it's on one.
• Footings sized for the span. Post footings poured to the load, not to habit. Central Texas caliche and clay both get their own treatment.
• Water has a plan. Integrated gutters and downspouts on solid covers, sloped so a Hill Country downpour sheets away from the slab and the foundation, not onto your guests.
• Electrical rough-in while it's open. Fan blocks, switched circuits, and outlet runs cost the least on install day. Raise them up front so you're not fishing wire later.
• Paperwork before posts. Permit and HOA submittals go in first; the build calendar starts when approvals land.

Plenty of quote requests come from new subdivisions where the builder left bare concrete — in Cibolo and the new phases around New Braunfels, a cover is the first thing the backyard needs. Just as many come from neighborhoods like Schertz, where first-generation builder covers from the 90s and 2000s are sagging, leaking at the ledger, or shedding paint. Those get replaced with modern engineered panels, and a good builder tells you plainly if your existing frame is worth keeping. Want the open-sky version instead? That's the pergola page — and if the household is split, the whole open-versus-solid case is argued both ways.